2017 Selected CEE Department Publications

Refereed Journal

  1. M. Ebrahimi, E. Gerber, and T. D. Rockaway, “Temporal performance assessment of wastewater treatment plants by using multivariate statistical analysis,” Journal of Environmental Management, vol. 193, pp. 234-246, 2017.
  2. M. Ebrahimi, H. Kazemi, S. A. Mirbagheri, and T. D. Rockaway, “An Integrated Approach to Treatment of High Strength Organic Wastewater by using Anaerobic Rotating Biological Contactor,” Journal of Environmental Engineering, vol. 144, no. 2, 2017.
  3. H. Kazemi, T. D. Rockaway, J. Rivard, and S. Abdollahian, “Assessment of Surface Infiltration Performance and Maintenance of Two Permeable Pavement Systems in Louisville, Kentucky,” Journal of Sustainable Water in the BuiltEnvironment, vol. 3, no. 4, p. 04017009, 2017.
  4. Y. H. Kim, Y. Park, and J.-W. Bai, “Probabilistic Shear Capacity Models for Concrete Members with Internal Composite Reinforcement,” Journal of Composites for Construction, vol. 21, no. 2, p. 04016083, 2017.
  5. W. Li, Z. Luo, Z. Sun, Y. Hu, and H. Duan, “Numerical Modelling of plastic-damage response and crack propagation in RAC under uniaxial loading,” Magazine of Concrete Research, vol. 69, no. 21, pp. 1-14, 2017.
  6. W. Li, Z. Sun, Z. Luo, and S. P. Shah, “Influence of Relative Mechanical Strengths between New and Old Cement Mortars on the Crack Propagation of Recycled Aggregate Concrete,” Journal of Advanced Concrete Technology, vol. 15, no. 3, pp. 110-125, 2017.
  7. R. Liu, Z. Sun, Q. Ding, P. Chen, and K. Chen, “Mitigation of Early-Age Cracking of Concrete Based on a New Gel-Type Superabsorbent Polymer,” Journal of Materials in Civil Engineering, vol. 29, no. 10, 2017.
  8. Z. Sun, F. Liu, T. Tong, C. Qi, and Q. Yu, “Hydration of Concrete Containing Hybrid Recycled Demolition Powders,” Journal of Materials in Civil Engineering, vol. 29, no. 7, 2017.
  9. Z. Li, “Next-Generation Intersection Control Powered by Autonomous and Connected Vehicle Technologies”, Information Technology and Intelligent Transportation Systems. Advances in Intelligent Systems and Computing, vol. 454. pp. 25-26. Springer, 2017.
  10. Z. Li, M. V. Chitturi, A. R. Bill, and D. A. Noyce, “ Operational Evaluation of Two-Lane Roundabouts at Freeway Ramp Terminals: Comparison Between Roundabout and Signalized Interchanges,” Transportation Research Record: Journal of the Transportation Research Board, vol. 2637, pp. 99-113, 2017.
  11. H. Liu, H. Wei, T. Zuo, Z. Li, and Y. J. Yang, “Fine-Tuning ADAS Algorithm Parameters for Optimizing Traffic Safety and Mobility in Connected Vehicle Environment,” Transportation Research Part C: Emerging Technologies, vol. 76, pp. 132-149, 2017.
  12. Q. Zhao and S. E. Burns, “Molecular simulation of electrokinetics of montmorillonite surface coated with hexadecyltrimethylammonium cations,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 516, pp. 354-361, 3/5/ 2017.

Conference Proceedings/Presentations

  1. L. Yang, Y. H. Kim, J. Hay, and J. Kielkopf, “Non-Contact Based Structural Damage Detection using Stochastic Subspace Identification and FEM Updating Method: Model Validation,” in Structural Congress, Denver, Colorado, 2017.
  2. J.-W. Bai, G. J. Carballo, J. R. Carrillo, and Y. H. Kim, “Probabilistic Model for Predicting Early Creep of Self-Consolidating Concrete Containing SCMs,” in ICOSSAR 2017: 12th International Conference on Structural Safety & Reliability, Vienna, Austria, 2017.
  3. Ghasemi-Fare and P. Basu, “Role of thermally induced buoyant flow in altering energy harvesting through geUnpublished Workmal piles,” in Geotechnical Frontiers 2017- ASCE, Orlando, FL, 2017.
  4. Ghasemi-Fare and A. Pak, “Prediction of maximum soil lateral displacement occurred during liquefaction-induced lateral spreading,” in Geotechnical Frontiers 2017- ASCE, Orlando, FL, 2017.
  5. W. M. McGinley and F. Nemati, “Modelling of Masonry Infill Walls With and Without Openings,” in 13th Canadian Masonry Symposium, Halifax , NS, Canada, 2017, p. 12.
  6. W. M. McGinley, D. Throop, and W. L. Coulbourne, “Tornado and High Wind Sheltering With Masonry,” in 13th Canadian Masonry Symposium, Halifax , NS, Canada, 2017, p. 12.
  7. Lewis, J.E.; Rockaway, T.D. Willing, G.A.; (2017) “Peer-Led-Team-Learning in a Mechanics I: Statics Course,” 124th Annual American Society for Engineering Education (ASEE), Columbus, OH, June 25-28.
  8. Liu, R., Sun, Z., Xiang, X., Chen, P., and Zhou, R. Reaction kinetics of cassava starch graft anionic/nonionic-type polymer internal curing agents, International Conference on Materials, Machinery and Information Technology Applications, Beijing, China, Jan 15-16, 2017.
  9. Khadgi, P., Bai, L. and Sun, Z. Mapping automated pavement data to windshield visual survey data: a statistical approach, TRB 96th Annual Meeting, Washington D.C., January 8-12, 2017.
  10. Z. Li, M.V. Chitturi, A.R. Bill, D.A. Noyce, “Modeling Queue Lengths at Roundabouts at Freeway Ramp Terminals”, in The 96th Transportation Research Board Annual Meeting, Washington, D.C., January, 2017.
  11. Z. Li, M.V. Chitturi, A.R. Bill, D.A. Noyce, “Operational Evaluation of Two-Lane Roundabouts at Freeway Ramp Terminals”, in The 96th Transportation Research Board Annual Meeting, Washington, D.C., January, 2017