Personal tools
You are here: Home Research Publications

Publications

(M.E. publications icon

2009

  1. Fuhrman, S., Karg, P., Bertocci, G., “Characterization of Pediatric Wheelchair Kinematics and Wheelchair Tiedown and Occupant Restraint System Loading During Rear Impact,” accepted in Medical Engineering and Physics, March 2009.
  2. D’Souza, R. and Bertocci, G., “Development and Validation of a Computer Crash Simulation Model of an Occupied Adult Manual Wheelchair Subjected to a Frontal Impact,” accepted in Medical Engineering and Physics, January 2009.
  3. Frost, K. and Bertocci, G., “Retrospective Review of Adverse Incidents Involving Passengers Seated in Wheeled Mobility Devices While Traveling in Large Accessible Transit Vehicles,” accepted in Medical Engineering and Physics, January 2009.
  4. Knight, A., Bertocci, G. and Pierce, M.C., “Assessment of Head Injury Risk Associated With Feet-First Free Falls in 12-Month-Old Children Using an Anthropomorphic Test Device,” Journal of Trauma, 66(4), 2009.
  5. Guo, Y., Wang, N., Bradshaw, R.D. and Brinson, L.C., “Modeling Mechanical Aging Shift Factors in Glassy Polymers During Nonisothermal Physical Aging. I. Experiments and KAHR-ATE Model Prediction,” Journal of Polymer Science, Part B: Polymer Physics, 47(3), 340-352, 2009.
  6. Bai, T., Bradshaw, R.D., Ramanathan, T., Nunalee, F.N., Shull, K.R., Mason, T. O. and Brinson, L.C., “Planar Aqueous Electrode Technique for Polymer Impedance Spectroscopy,” Polymer Engineering and Science, DOI 10.1002/pen.21276.
  7. Liu,Y. and Day, M.L. “Concept Modeling of Tapered Thin-Walled Tubes,” Journal of Mechanical Science and Technology, 10, 44-53, 2009.
  8. Hnat, W., Conway, J, Malkani, A., Yakkanti, M., and Voor, M., “The Effect of Modular Tapered Fluted Stems on Proximal Stress Shielding in the Human Femur,” Journal of Arthroplasty, accepted for publication in 2009.
  9. Lian, Y., “Numerical Investigation of Boundary Effects on Flapping Wing Study,” accepted by AIAA Journal.
  10. Liu, Y., Lu, S. and Panchapakesan, B., “Alignment Enhanced Photoconductivity in Carbon Nanotube Films,” Nanotechnology, 20(3), 2009.
  11. Prater, G., Shahhosseini, A.M., Osborne, G.M., Lone, J.M. and Zhang, S., “Simulation Studies for Determining the Response Characteristics of a Hydraulic Hybrid Powertrain Subframe,” Int. J. Heavy Vehicle Systems, accepted May 2009, in press.
  12. Zhang, S., Prater, G., Shahhosseini, A.M. and Osborne, G.M., “Gauge Sensitivity Indices for Vehicle Body Structure Assessment and Optimization,” Int. J. Vehicle Systems Modelling and Testing, accepted May 2009, in press.
  13. Osborne, G.M., Prater, G. and Shahhosseini, A.M., “Optimization of a Pickup Truck Cargo Box Floorpan Design Using Finite Element Concept Models,” Int. J. Vehicle Systems Modeliing and Testing, accepted August 2008, in press.
  14. Shahhosseini, A.M., Prater, G., Osborne, G.M., Kuo, E.K. and Mehta P.R., “Major Compliance Joint Modelling for Automotive Body Structures,” Int. J. Vehicle Systems Modelling and Testing, accepted June 2008, in press.
  15. Magnuson, D., Smith, R., Brown, E., Enzmann, G., Angeli, C., Quesada, P. and Burke, D., “Swimming as a Model of Task-Specific Locomotor Re-Training After Spinal Cord Injury in the Rat,” Neurorehabilitation & Neural Repair, March 2009.
  16. Doane, J.E. and Quesada, P.M., “A New Method for Estimating Subject Specific Body Segment Parameters Using Motion Tracking Data,” Theoretical Issues in Ergonomic Science, 10(1), 69-76, 2009.
  17. Richards, C.M. and Summers, T.W., “Transient Response Simulation of an Off-Road Motorcycle with Conventional and Multi-Cell Tire Inflation Mechanisms,” Tire Science and Technology Journal, 35(2), 2007.
  18. Zhang, J. and Richards, C.M., “Parameter Identification of Analytical And Experimental Rubber Isolators Represented by Maxwell Models,” Mechanical Systems and Signal Processing, 21(7), 2814-2832, 2007.

2008

  1. Fuhrman, S., Karg, P. and Bertocci, G., “Effect of Wheelchair Headrest Use During Rear Impact on Pediatric Head and Neck Injury Risk Outcomes,” Accident Analysis and Prevention, 40(4), 2008.
  2. Chadwick, D., Bertocci, G., Castillo, E., Frasier, L., Gunther, E., Hansen, K., Herman, B. and Krous, H., “The Annual Risk of Death From Short Falls of Young Children: Less Than One in a Million,” Pediatrics, 121(6), 2008.
  3. Pierce M.C. and Bertocci, G., “Injury Biomechanics and Child Abuse,” Annual Reviews in Biomedical Engineering, 10, 2008.
  4. Schneider, L., Hobson, D. and Bertocci, G., “Development of Voluntary Equipment Standards for Transportation Safety of Wheelchair Users,” Assistive Technology, 20(4), 2008.
  5. Resapu, R.R., Nagendran, K.B., Bradshaw, R.D., “A Finite Element Method for the Determination of Optimal Viscoelastic Material Properties from Indentation Tests of Polymer Film and Wire with Polymer Insulation,” Experimental Mechanics, 48, 713–729, DOI 10.1007/s11340-007-9109-x, 2008.
  6. Liu,Y., and Day, M.L., “Experimental Analysis and Computer Simulation of Automotive Bumper System Under Impact Conditions,” International Journal for Computational Methods in Engineering Science and Mechanics, 9, 51-59, 2008.
  7. Liu,Y., and Day, M.L., “Bending Collapse of Thin-Walled Circular Tubes and Computational Application,” Thin-Walled Structures, 46, 442-450, 2008.
  8. Liu,Y., and Day, M.L., “Multi-Axis Bending of Channel Section Beam and Modelling,” Thin-Walled Structures, 46, 1290-1303, 2008.
  9. Liu,Y., and Day, M.L., “Simplified Truck Chassis Modeling and Crashworthiness Analysis,” International Journal of Heavy Vehicle System, 15, 237-254, 2008.
  10. Liu,Y., and Day, M.L., “Simplified Modeling of Cross Members in Vehicle Design,” SAE Transactions, Journal of Passenger Cars: Mechanical Systems, 116, 2008.
  11. Doering, T.J., Hishmeh, S.F., Dodson, T.L., White, A.-R., Eluru, P.R., Padmanabhan, P., Gailey, M.B., Bux, K.J., Schulte, M.A., Crowe, A.F., Hutchison, W.C., Gleim, C.N., McClure, D.T., Malphrus, B.K., Kruth, J.A., Lumpp, J.E., “The KySat Space Express Sub-Orbital Mission Summary”, 2008 IEE Aerospace Conference, Big Sky, MT, 1-8 March 2008.
  12. Shyy, W., Lian, Y., Tang, J., Viieru, D., and Liu, H., Aerodynamics of Low Reynolds Number Flyers, Cambridge University Press, 2008.
  13. Shyy, W., Lian, Y., Tang, J., Liu, H., Trizila, P., Stanford, B., Bernal, L., Cesnik, C., Friedman, P., and Ifju, P., “Computational Aerodynamics of Low Reynolds Number Plunging, Pitching and Flexible Wings for MAV Applications,” Review Paper, Acta Mech Sin, 24, 351-373, 2008.
  14. Shao, N., Wickstrom, E. and Panchapakesan, B., “Nanotube Antibody Biosensor Arrays for Detecting Circulating Cancer Cells,” Nanotechnology, 19(46), 2008.
  15. Zhang, S., Prater, G., Shahhosseini, A.M. and Osborne, G.M., “Experimental Validation of Structural Gauge Sensitivity Indices for Vehicle Body Structure Optimization,” Experimental Techniques, 2008, 32(5), pp. 51-54.
  16. Andrusiv, L.P., Prater, G. and Richards, C.M., “Dynamic Behavior of Segmented Telescoping Structures in Automotive Systems,” SAE Int. J. Passeng. Cars - Mech Syst., 2008, 1(1):238-249.
  17. Prater, G., Zhang, S., Shahhosseini, A.M. and Osborne, G.M., “Application and Experimental Validation of Gauge Sensitivity Indices for Vehicle Body Structure Optimization,” SAE Technical Paper Series, paper number 2008-01-0883, 2008.
  18. Leijnse, J.N.A.L., Campbell-Kyureghyan, N.H., Spektor, D., and Quesada, P.M., “Measuring Independent Finger Muscle Action in the Extensor Digitorum and Other Finger Extensors by Surface EMG,” Journal of Neurophysiology, 100, 2008.
  19. Carnahan, J.J. and Richards, C.M., “A Modification to Filtered-X LMS Control for Airfoil Vibration and Flutter Suppression,” Journal of Vibration and Control, 14, 831-848, 2008.
  20. Sharp, M.K., Richards, C.M., Gillars, K.J., Koenig, S.C. and Pantalos, G.M., “The Influence ff Mock Circulations Input Impedance on Valve Acceleration During In Vitro Cardiac Device Testing,” ASAIO J, 54(4), 341-346, 2008.
  21. Berson, R.E., Purcell, M.R. and Sharp, M.K., “Computationally Determined Shear on Cells Grown in Orbiting Culture Dishes,” Advances in Experimental Medicine and Biology, 614, 189-198, 2008.

2007

  1. Berfield, T.A., Ong, R.J., Payne, D.A. and Sottos, N.R., “Residual Stress Effects on Piezoelectric Response of Sol-Gel Derived Lead Zirconate Titanate Thin Films,” Journal of Applied Physics, 101, 2007.
  2. Berfield, T.A., Patel, J.K., Shimmin, R.G., Braun, P.V., Lambros, J. and Sottos, N.R., “Micro- and Nanoscale Deformation Measurement of Surface and Internal Planes Via Digital Image Correlation,” Experimental Mechanics, 47, 51-62, 2007.
  3. Bradshaw, R.D. and Gutierrez, S.E., “Characterization of Fatigue Crack Initiation and Growth in Hybrid Aluminum-Graphite Fiber Composite Laminates Using Image Analysis,” Fatigue & Fracture of Engineering Materials & Structures, 30(8), 2007.
  4. Guo, Y. and Bradshaw, R.D., “Isothermal Physical Aging Characterization of Polyether-Ether-Ketone (PEEK) and Polyphenylene Sulfide (PPS) Films by Creep and Stress Relaxation,” Mechanics of Time-Dependent Materials, 11(1), 61-89, 2007.
  5. Albanese, M., Boulware, C., Brehob, E., Sharp, M.K., “Passive Solar Heating Strategies for Kentucky’s Moderately Cold and Moderately Sunny Climate,” Sustain, 15, 22-30, 2007.
  6. Cobourn, W.G., “Accuracy and Reliability of an Automated Air Quality Forecast System for Ozone in Seven Kentucky Metropolitan Areas,” Atmospheric Environment, 41(28), 5863-5875, 2007.
  7. Lin, Y. and Cobourn, W.G., “Fuzzy System Models Combined with Nonlinear Regression for Daily Ground-Level Ozone Predictions,” Atmospheric Environment, 41(16), 3502-3513, 2007.
  8. Liu,Y., and Day,M.L., “Development of Simplified Finite Element Models for Straight Thin-Walled Tubes with Octagonal Cross Section,” International Journal of Crashworthiness, 12(5), 503-508, 2007.
  9. Liu,Y., and Day,M.L., “Development of Simplified Thin-Walled Beam Models for Crashworthiness Analyses,” International Journal of Crashworthiness, 12(6), 2007.
  10. Lin, J., Walsh, K., Jackson, D., Aebersold, J., Crain, M., Naber, J., and Hnat, W., “Development of Capacitive Pure Bending Strain Sensor for Wireless Spinal Fusion Monitoring,” Sensors and Actuators, A 138, 276-287, 2007.
  11. Chandler, G.D., McClure, D.T., Hishmeh, S.F., Lumpp, J.E., Carter, J.B., Malphrus, B.K., Erb, D.M., Hutchison, W.C., Strickler, G.R., Cutler, J.W., Twiggs, R.J. “Development of an Off-the-Shelf Bus for Small Satellites”, 2007 IEEE Aerospace Conference, Big Sky, MT, 3-10 March 2007.
  12. Lian, Y., and Shyy, W., “Laminar-Turbulent Transition of a Low Reynolds Number Rigid or Flexible Airfoil,” AIAA Journal, 47(7) , 2007.
  13. Lu, S. and Panchapakesan, B., “All Optical Micromirrors Based on Nanotube Actuators with Wavelength Selectivity,” Journal of Micro-Electro-Mechanical Systems, 16(6), 1515-1523, 2007.
  14. Ahir, S., Lu, S., Panchapakesan, B. and Terentjev, E., “Thermal Fluctuations, Stress Relaxation, and Actuation in Carbon Nanotube Networks,” Physical Review B, 76, 2007.
  15. Lu, S. and Panchapakesan, B., “Alignment Dependent Mechanical Responses of Carbon Nanotubes to Light,” Applied Physics Letters, 91(10), 2007.
  16. Shao, N., Lu, S. and Panchapakesan, B., “Integrated Molecular Targeting of IGF1R and Her2 Surface Receptors and Breast Cancer Therapy Using Carbon Nanotubes,” Nanotechnology, 18(31), 2007.
  17. Lu, S. and Panchapakesan, B., “Photomechanical Responses of Nanotube-Polymer Actuators,” Nanotechnology, 18(30), 2007.
  18. Panchapakesan, B. and Wickstrom, E., “Nanotechnology For Sensing, Imaging And Treating Cancer,” Journal of Surgical Oncology of North America, 16(2), 2007 293-305 (review article).
  19. Lu, S., Sivakumar, K. and Panchapakesan, B., “Sonochemical Synthesis of Platinum Nanowires and Its Applications as Electro-Chemical Actuators,” Journal of Nanoscience and Nanotechnology, 7(7), 292-305, 2007.
  20. Lu, S., Shao, N., Liu, Y. and Panchapakesan, B., “Nanotube Micro-Opto-Mechanical Systems,” Nanotechnology, 18(6), 2007.
  21. Geck, P., Goff, J.B., Sohmshetty, R., Laurin, K.R., Prater, G. and Furman, V., “IMPACT Phase II - Study to Remove 25% of the Weight from a Pick-Up Truck,” SAE Technical Paper Series, paper no. 2007-01-1727, 2007.
  22. Kuo, E.Y., Prater, G., Shahhosseini, A.M. and Mehta, P.R., “Analytical Benchmarking of Body Architectural Efficiency of Competitive Vehicles,” SAE Technical Paper Series, paper no. 2007-01-0357, 2007.
  23. Nyland J., Frost, K.L., Swank, A.M., Quesada, P.M., Angeli, C.A., Topp, R.V. and Malkani, A., “Self Reported Chair Rise Ability Relates to Stairclimbing Readiness of Total Knee Arthroplasty Patients: A Pilot Study,” Journal of Rehabilitation Research and Development, 44(5), 751-760, 2007
  24. Quesada, P.M., Durham, M.P., Topp, R.V., Swank, A.M. and Biton, D., “Quantitative Assessment Of Balance Performance On a Passively Unstable Surface,” Occupational Ergonomics, 7(1), 3-10, 2007.
  25. Jang, R-L., Karwowski, K., Quesada, P.M., Rodrick, D., Sherehiy, B., Cronin, S.N. and Layer, J.K., “Biomechanical Evaluation of Nursing Task in a Hospital Setting,” Ergonomics, 50(11), 1835-1855, 2007.
  26. Khalaf, T., Karwowski, W., Quesada, P.M., and Sherehiy, B., “Effects of Three Keyboard Designs on Wrist and Forearm Postures and Typing Task Performance,” Occupational Ergonomics, 7(2), 115-123, 2007.
  27. Broskey, J and Sharp, MK, “Evaluation of Mechanisms of Postflight Orthostatic Intolerance with a Simple Cardiovascular System Model,” Ann Biomed Eng, 35(10), 1800-1811, 2007.

2006

  1. Berfield, T.A., Patel, J.K., Shimmin, R.G., Braun, P.V., Lambros, J. and Sottos, N.R., “Fluorescent Image Correlation for Nanoscale Deformation Measurements,” Small, 2, 631-635, 2006.
  2. Liu, Y.C. and Day, M.L., “Bending Collapse of Thin-Walled Beams with Channel Cross-Section,” International Journal of Crashworthiness, 11(3), 251-262, 2006.
  3. Liu, Y.C. and Day, M.L., “Simplified Modeling of Thin-Walled Box Section Beam,” International Journal of Crashworthiness, 11(3), 263-272, 2006.
  4. Abersold, J., Walsh, K., Crain, M., Martin, M., Voor, M., Lin, J-T., Jackson, D., Hnat, W. and Naber, J., “Design and Development of a MEMS Capacitive Bending Strain Sensor,” Journal of Microengineering & Microelectronics, 16, 1-8, 2006.
  5. Lian, Y., and Liou, M-S., “Aero-Atructural Optimization of a Transonic Compressor Rotor,” Journal of Propulsion and Power, 22(4), 880-888, 2006.
  6. Lian, Y., and Kim, N-H., “Reliability-Based Design Optimization of a Transonic Compressor,” AIAA Journal, 44(2), 368-375, 2006.
  7. Teker, K. and Panchapakesan, B., “Biomolecular Tuning of Electron Transport Properties of Carbon Nanotubes Via Antibody Functionalization,” IEEE Sensors Journal, 6(6), 1422-1428, 2006.
  8. Lu, S. and Panchapakesan, B., “Nanotube Micro-Opto-Mechanical Actuators,” Applied Physics Letters, 88(25), 2006.
  9. Kuo, E.Y., Mehta, P.R., Prater, G. and Shahhosseini, A.M., “Reliability and Quality of Body Concept CAE Models for Design Direction Studies,” SAE Technical Paper Series, paper no. 2006-01-1617, 2006.
  10. Zhang, J. and Richards, C.M., “Dynamic Analysis and Parameter Identification of a Single Mass Elastomeric Isolation System Using a Maxwell-Voigt Model,” ASME Journal of Vibration and Acoustics, 128(6), 713-721, 2006.
  11. Hooker, EA, Danzl, DF, O’Brien, D, Presley, M, Whitaker, G and Sharp, MK, “Percutaneous Transtracheal Ventilation: Resuscitation Bags Do Not Provide Adequate Ventilation,” Prehospital and Disaster Medicine, 21(6), 431-5, 2006.

2005

  1. Ong, R.J., Berfield, T.A., Sottos, N.R. and Payne,D.A., “Sol-Gel Derived Pb(Zr,Ti)O3 Thin Films: Residual Stress and Electrical Properties,” Journal of the European Ceramics Society, 25, 2247-2251, 2005.
  2. Cobourn, W.G., “Updated Trends in Meteorologically Adjusted Ozone Concentrations in Seven Kentucky Metro Areas,” 2000-2004 AWMA Conference on Environmental Data Analysis, Oak Brook, IL, October 4-5, 2005.
  3. Abersold, J., Walsh, K., Crain, M., Martin, M., Voor, M., Lin, J-T., Jackson, D., Hnat, W. and Naber, J., “Design Modeling, Fabrication and Testing of a MEMS Capacitive Bending Strain Sensor,” IMEMS 2006 Conference, Singapore, October 2005.
  4. Lian, Y., and Liou, M-S., “Multi-Objective Optimization of a Transonic Compressor Rotor Using Evolutionary Algorithm,” Journal of Propulsion and Power, 21(6), 979-987, 2005.
  5. Lian, Y., and Liou, M-S., “Multi-Objective Optimization Using Coupled Response Surface Model and Evolutionary Algorithm,” AIAA Journal, 43(6), 1316-1325, 2005.
  6. Lian, Y., and Shyy, W., “Three-Dimensional Fluid-Structure Interactions of a Membrane Wing for Micro Air Vehicle Applications,” Journal of Aircraft, 42(5), 865-873, 2005.
  7. Lian, Y., and Liou, M-S., “Mining of Data from Evolutionary Algorithms for Improving Design Optimization,” Computer Modeling in Engineering & Sciences, 8(1), 61-72, 2005.
  8. Prater, G., Kuo, E.Y., Furman, V.T., Mehta, P.R. and Shahhosseini, A.M., “Finite Element Concept Models for Vehicle Architecture Assessment and Optimization, SAE Transactions, 114(6), 2005.
  9. Summers, T.W., Richards, C.M. and Jarboe, N.E., “A Simplified Model for Predicting the Pneumatic Stiffness of Conventional and Multi-Cell Inflation Mechanisms for Off-Road Tires,” Tire Science and Technology Journal, 33(3), 179-190, 2005.
  10. Pantalos, G.M., Sharp, M.K., Woodruff, S.J., O’Leary, S.D., Gillars, K.J., Schurfranz, T., Everett, S.D., Lemon, M., Schwartz, J. and Bennett, T.E., “The Effect of Gravitational Acceleration on Cardiac Diastolic Function: A Biofluid Mechanical Perspective with Initial Results,” Curr Pharm Biotechnol, 6(4), 331-41, 2005.

2004

  1. Cobourn, W.G. and Lin, Y., “Trends in Meteorologically Adjusted Ozone Concentra¬tions in Six Kentucky Metro Areas, 1998-2002,” Journal of the Air and Waste Management Association, 54, 1383-1393, 2004.
  2. Lian, Y., Shyy, W., and Haftka, R., “Shape Optimization of a Membrane Wing for Micro Air Vehicles,” AIAA Journal, 42, 424-426, 2004.
  3. Garbie, I.H., Parsaei, H.R., Leep, H.R., Wong, J.P., “A New Similarity Coefficient between a New Part and the Existing Manufacturing Cells,” Proceedings Annual IIE Conference, 691, 2004.
  4. El Mota, K.M.G., Parsaei, H.R., Leep, H.R., Wong, J.P., “A Modal to Qualify the Effect of Operational Performance Measures,” Proceedings 34th International Conference on Computers & Industrial Engineering, 535-542, 2004.
Document Actions
Personal tools