Skip to content. | Skip to navigation

Personal tools
You are here: Home Research 2007 Publications

2007 Publications

Published (9)

  1. Lan, G., G.W. DePuy, and G.E. Whitehouse, 2007. “An Effective and Simple Heuristic for the Set Covering Problem,” European Journal of Operations Research, Vol. 176, No. 3, pp. 1387-1403.
  2. DePuy, G.W., and G.D. Taylor, 2007. “Using Board Puzzles to Teach Operations Research,” INFORMS Transactions on Education, Vol. 7, No. 2.
  3. DePuy G.W., J.S. Usher, R.L. Walker, and G.D. Taylor, 2007. “Production Planning for Remanufactured Products,” Production Planning and Control, Vol. 18, No. 7, pp. 573-583.
  4. Ko, H.J. and G.W. Evans, “A Genetic Algorithm-Based Heuristic for the Design and Operation of a Dynamic Facility Network for 3PL’s,” Computers and Operations Research 34:2, pp. 346-366, February 2007.
  5. Ellspermann, S.J., G.W. Evans , and M. Basadur, “The Impact of Training on the Formulation of Ill-Structured Problems,”  Omega 35:2, pp. 221-236, April 2007.
  6. S. Hales*, S.S. Heragu, R.J. Graves, S. Jennings, and C.J. Malmborg, “A Multimedia Educational Tool Integrating Materials Handling Technology, Analysis and Design Using a Virtual Distribution Center", European Journal of Industrial Engineering, Vol. 1, No. 1, pp. 93-110, 2007.
  7. R.J. Mantel, P.C. Schuur, and S.S. Heragu, “Order Oriented Slotting: A New Assignment Strategy for Warehouses", European Journal of Industrial Engineering, Vol. 1, No. 3, pp. 301-316, 2007.
  8. Sarhan, A.M., F. M. Guess, and J.S.Usher, “Estimators for reliability measures in geometric distribution model using dependent masked system life test data”, IEEE Transactions on Reliability, Vol 56, No. 2, pp 312-320, June 2007.
  9. Humphrey, A.S., Taylor, G.D., Usher, J.S., and Whicker, G.L., “Evaluating the Efficiency of Trucking Operations with Weekend Freight Leveling,” International Journal of Physical Distribution and Logistics Management, Vol. 37, No 5, pp 360-374, 2007.

 

Accepted (9)

  1. DePuy G.W., J.S. Usher, R.L. Walker, and G.D. Taylor. “Production Planning for Remanufactured Products,” accepted by Production Planning and Control.
  2. Hepdogan, S., R. Moraga, G.W. DePuy, and G.E. Whitehouse. “A Meta-RaPS Solution for the Early/Tardy Single Machine Scheduling Problem,” accepted by International Journal of Production Research.
  3. Hepdogan, S., R. Moraga, G.W. DePuy, and G.E. Whitehouse. “Nonparametric Comparison of Two Dynamic Parameter Setting Methods in a Meta-Heuristic Approach,” accepted by Journal of Systemics, Cybernetics and Informatics.
  4. Meng, G.,  S.S. Heragu and H. Zijm, “Two-level Analysis of Manufacturing Systems with Cells or Departments,” to appear in International Journal of Production Research.
  5. Garbie, I.H., H.R. Parsaei, & H.R. Leep, “A Novel Approach for Measuring Agility in Manufacturing Firms,” International Journal of Manufacturing Technology and Management [accepted for publication]
  6. Garbie, I.H. ,H.R. Parsaei, & H.R. Leep “Measurement of Needed Reconfiguration Level for Manufacturing Firms,”  , to appear, International Journal of Agile Systems and Management.
  7. Jeon, G. & H.,R. Leep, “A Vehicle Routing Problem Solved by Using a Hybrid Genetic Algorithm,”  to appear, Journal of Computers & Industrial Engineering.
  8. Campbell-Kyureghyan, N., Marras, W. “Combined Experimental and Analytical Model of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part I – Model Description”, to appear, International Journal for Computational Vision and Biomechanics.
  9. Campbell-Kyureghyan, N., Marras, W. “Combined Experimental and Analytical Model of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part II – Model Validation”, to appear, International Journal for Computational Vision and Biomechanics.

 

Submitted (14)

  1. L. Chen and T. Homem-de-Mello, “An Alternative Discrete Choice Model by Customer Preferences'', submitted to European Journal of Operational Research.
  2. Hepdogan, S., R. Moraga, G.W. DePuy, and G.E. Whitehouse. “Nonparametric Comparison of Two Dynamic Parameter Setting Methods in a Meta-Heuristic Approach,” submitted to Journal of Systemics, Cybernetics and Informatics.
  3. Kuruvilla, A., Alexander, S.M., and Gill, R. “Model to Study the Cascading Effects of Diversion among Hospitals”, submitted to the Journal of Academic Emergency Medicine.
  4. Kuruvilla, A., Alexander, S.M., and Gill, R. "911 Calls as a Predictor for Ambulance Diversion,", submitted to the Annals of Emergency Medicine.
  5. Campbell-Kyureghyan, N., Marras, W. “Combined Experimental and AnalyticalModel of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part I– Model Description”, submitted to International Journal for Computational Vision and Biomechanics.
  6. Campbell-Kyureghyan, N., Marras, W. “Combined Experimental and AnalyticalModel of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part II – Model Validation”, submitted to International Journal for Computational Vision and Biomechanics.
  7. Leijnse, J., Campbell-Kyureghyan, N., Spektor, D.*, Quesada, P. Assessment of Individual Finger Muscle Activity in the Extensor Digitorum Communis by Surface EMG, submitted to, Journal of Neurophysiology.
  8. Campbell-Kyureghyan, N., Yalla, S. V.*, Voor, M. “Effect of Orientation on Measured Failure Strengths of Thoracic and Lumbar Spine Segments”, submitted to Journal of the Mechanical Behavior of Biomedical Materials.
  9. L. Chen and S. Sondhi, “Dynamic Revenue Management in Extra Space Storage'',submitted to International Journal of Revenue Management.
  10. L. Chen, “Stochastic Multi-Stage Resource Allocation Model with Reservation'', submitted to Computers and Operations Research.
  11. J. Jia* and S.S. Heragu, “Analysis of Semi-Open Queuing Networks via Analytical Matrix Geometric Methods,” submitted to Operations Research.
  12. Heragu,  S.S. and M. Srinivasan*, “Analysis of Manufacturing Systems via Semi-Open Queuing Networks,” submitted to IIE Transactions.
  13.  Zhang, L., A. Krishnamurthy, C. J. Malmborg, and S.S. Heragu “Variance-Based Approximations of Transaction Waiting Times in Autonomous Vehicle Storage and Retrieval Systems”, submitted to International Journal of Production Research.
  14. Heragu, S.S. C. Xiao*, A. Krishnamurthy, and C. J. Malmborg, “Analytical Model for Autonomous Vehicle Storage/Retrieval Systems”, submitted to IIE Transactions.

 

Chapters in books (3)

  1. Biles, W. E., “Environmentally Benign Manufacturing,” Chapter 1 in Environmentally Conscious Manufacturing, (M. Kutz, Editor), Wiley, New York (2007), pp 1-28.
  2. Heragu, S.S. “Material Handling System”, in G.D. Taylor, (Ed.), Logistics Engineering Handbook, CRC Press, Boca Raton, FL, 2007, pp. 11.1-11.26.
  3. Heragu, S.S. G. Meng, and W.H.M. Zijm, “Stochastic Models for Facilities Logistics”, in M. Lahmar (Ed.)., Facility Logistics: Approaches and Solutions to Next Generation Challenges, CRC Press, Boca Raton, FL, 2007, pp. 127-152.

 

CONFERENCE PROCEEDINGS PUBLICATIONS

 

Published (15)

  1. Taylor, G.D., G.W. DePuy, and J.S. Usher. “Layout Optimization for Barge Fleet Operations,” Proceedings of the 2007 Industrial Engineering Research Conference, May 19-23, 2007, Nashville, TN.
  2. Evans, G.W. and G.W. DePuy. “Using a Simulation/Optimization Tool for Determining Inventory Policies in a Distribution System,” Proceedings of the 2007 Industrial Engineering Research Conference, May 19-23, 2007, Nashville, TN.
  3. Hardin, C.T., J.S. Usher, G.W. DePuy, and A.S. Elmaghraby. “Self Organizing Tiles: A New Facilities Layout Method,” Proceedings of the 2007 Industrial Engineering Research Conference, May 19-23, 2007, Nashville, TN.
  4. Wang, X., Alexander, S.M. and Griffin, B. “Matching Records in the Medicare Common Working File”, Proceedings 2007 IEMS Conference, March 12-14, 2007, Cocoa Beach Florida; N. Aly editor, pp. 151-157.
  5. Janjirala, P., Sivagurunathan, S., Alexander, S.M. and Evans, G.W. “Improving the Logistics of Milk Collection via Simulation” Proceedings 2007 IEMS Conference, March 12-14, 2007, Cocoa Beach Florida; N. Aly, editor, pp. 602-605
  6. ElSaid, W.H., and Alexander, S.M., “Explosives Detection: System Modeling and Architecture”  Proceedings, 13 th. ISSAT International Conference on Reliability and Quality in Design, August 2-4, Seattle, Washington; pp. 386-389.
  7. Biles, W. E., J. P. C. Kleijnen, W. C. M. van Beers, and I. van Niewenhuyse, “Kriging Metamodeling in Simulation Optimization: An Explorative Study,” in Proceedings of the 2007 Winter Simulation Conference, (S. G. Henderson, B. Biller, M-H Hsieh, J. D. Tew and R. R. Barton, Editors), Washington. D. C. (2007) pp 355-362.
  8. Knight, A., Bertocci, G., Clyde Pierce, M., Campbell-Kyureghyan, N. “HeadInjury Risk Associated with Falls from Standing in Children and the Influence of Joint Stiffness”, Proceedings of 2007 Injury Biomechanics Symposium, May 21-22, Columbus, OH, 2007.
  9. Yalla, S. V., Burnett, D., Campbell-Kyureghyan, N. “Effect of Orientation on Measured Failure Strengths of Thoracic and Lumbar Spine Segments”, Proceedings of 2007 Injury Biomechanics Symposium, May 21-22, Columbus, OH, 2007.
  10. Campbell-Kyureghyan, N., Yalla, S. V., Burnett, D., Voor, M. “Failure Criteria and Effect of Segment Orientation for Lumbar Spine Segments”, Proceedings of American Society of Biomechanics Annual Conference, Stanford University, August 22-25, 2007.
  11. L. Chen and T. Homem-de-Mello, “Modeling Discrete Customer Choices by Preference Orders in Airline Revenue Management'', Proceedings of the 2007 Industrial Engineering Research Conference.
  12. Q, Cui and L. Chen, “Contractor Maintenance Strategy for Multiple Warranty Projects under Uncertainty'', Proceedings of the 2007 Industrial Engineering Research Conference.
  13. Evans, G.W.  and S.M Alexander, “Using Multi-Criteria Modeling and Simulation to Achieve Lean Goals,” Proceedings of the 2007 Winter Simulation Conference, Washington D.C.,December 2007.
  14. Heragu, S., G.W. Evans, and X. Yang, “Analysis of Trucking Strategies at a Major Consumer Goods Manufacturer and Distributor,” Proceedings of the 5th International Conference on Supply Chain Management and Information Systems, Melbourne, Australia, December 2007.
  15. Heragu, S.S. G.W. Evans and X. Yang, “Analysis of Trucking Strategies at a Major Consumer Goods Manufacturer and Distributor,” Proceedings of the SCMIS 2007 Conference, December 9-12, 2007, Melbourne, Australia.

 

Other Publications, Published or Accepted (2)

  1. DePuy, G.W., 2007, “Multiple Shuttle ASRS systems with acceleration/deceleration considerations,” White Paper, CICMHE/Material Handling Industries of America, Inc.
  2. Usher, J.S., “Get it in Writing”, Paper 360º, September 2007, p 32.

 

Presentations (31)

  1. Evans, G.W. and G.W. DePuy. “Using a Simulation/Optimization Tool for Determining Inventory Policies in a Distribution System,” 2007 Industrial Engineering Research Conference, May 19-23, 2007, Nashville, TN.
  2. Biles, W. E., J. P. C. Kleijnen, W. C. M. van Beers, and I. van Niewenhuyse, “Kriging Metamodeling in Simulation Optimization: An Explorative Study,” 2007 Winter Simulation Conference.
  3. Burnett, D. R., Yalla, S. V., Campbell-Kyureghyan, N. H., Voor, M. “Influence of Spinal Segment Orientation and Loading Frequency on Safe Lifting Limits” EExpo’06, Louisville, KY, 2007.
  4. Knight, A., Bertocci, G., Clyde Pierce, M., Campbell-Kyureghyan, N. “Head Injury Risk Associated with Falls from Standing in Children and the Influence of Joint Stiffness”, Injury Biomechanics Symposium, May 21-22, Columbus, OH, 2007.
  5. Yalla, S. V., Burnett, D., Campbell-Kyureghyan, N. “Effect of Orientation onMeasured Failure Strengths of Thoracic and Lumbar Spine Segments”, Injury Biomechanics Symposium, May 21-22, Columbus, OH, 2007.
  6. Campbell-Kyureghyan, N., Yalla, S. V., Burnett, D., Voor, M. “Failure Criteriaand Effect of Segment Orientation for Lumbar Spine Segments”, American Society of Biomechanics Annual Conference, Stanford University, August 22-25, 2007.
  7. Burnett, D., Campbell-Kyureghyan, N., Topp, R., Quesada, P. “Does Back Pain Precede Knee Problems in Individuals with Unilateral Knee OA?” Research! Louisville 2007 Annual Conference, Louisville, KY, Oct 16-19, 2007.
  8. L. Chen, “Comparing Available Discrete Customer Choice Models'', 2007 INFORMS annual meeting, November 2007, Seattle, WA.
  9. L. Chen, “Bounds Properties on Multi-Stage Resource Reservation Model'', 2007 INFORMS annual meeting, November 2007, Seattle, WA.
  10. L. Chen, “Handle Discrete Customer Choice with Mathematical Programming Model'', 2007 IERC IIE annual meeting, May 2007, Nashville, TN.
  11. Janjirala, P., S. Sivagurunathan, S.M. Alexander and G.W. Evans, “Improving the Logistics ofMilk Collection via Simulation,” 2007 International Conference on Industry, Engineering, and Management Systems, Cocoa Beach, Florida.
  12. Evans, G.W., G.W. DePuy, and A. Gupta, “Simulation and Optimization Methodologies to Determine Distribution System Inventory Policies,” 2007 Industrial Engineering Research Conference, Nashville, TN, May 2007.
  13. Evans, G.W.  and S.M Alexander, “Using Multi-Criteria Modeling and Simulation to Achieve Lean Goals,” 2007 Winter Simulation Conference, Washington D.C.,December 2007.
  14. Heragu, S., G.W. Evans, and X. Yang, “Analysis of Trucking Strategies at a Major Consumer Goods Manufacturer and Distributor,” 5th International Conference on Supply Chain Management and Information Systems, Melbourne, Australia, December 2007.
  15. Forgie, C., G.W. Evans, and W.E. Biles, “Modeling Technology Development Risk for Space Exploration Systems,” Midwest INFORMS Conference, Northwestern University, Evanston, IL, August 25, 2007.
  16. Gupta, A. and G.W. Evans, “Optimization Modeling for the Operation of Closed Loop Supply Chains,” Midwest INFORMS Conference, Northwestern University, Evanston, IL, August 25, 2007.
  17. Yang, X., G.W. Evans, and S. Heragu, “Allocation of Trucking Strategies to Carriers,” INFORMS Annual Meeting, Seattle, November 2007.
  18. Heragu, S., “Solving Semi-Open Queuing Networks via Matrix Geometric Methods,” Erasmus University, May 25, 2007, Rotterdam, The Netherlands.
  19. Heragu, S., “Analytical Models for Warehouse Design”, Savoye Logistics, Genlis and Paris, France, May 28-29, 2007.
  20. Heragu, S., “Solving Semi-Open Queuing Networks via Matrix Geometric Methods,” Indian Institute of Technology, July 9, 2007, Mumbai, India.
  21. Heragu, S., “Materials Handling, Storage and Warehousing Seminar,” Workshop for Company Executives organized by the Logistics and Distribution Institute (LODI), Louisville, KY, August 8th, 2007.
  22. Heragu, S., “Analytical models for strategic, intermediate, and real-time design and management of warehousing systems,” Systems & Industrial Engineering department seminar, University of Arizona, Oct 2007, Tucson, AZ.
  23. Heragu, S., “Analytical Model for Autonomous Vehicle Storage/Retrieval Systems”, INFORMS Conference, November 5-9, 2007, Seattle, WA.
  24. Heragu, S., “Web Interface for the Conceptualization of AVS/RS and AS/RS,” INFORMS Conference, November 5-9, 2007, Seattle, WA.
  25. Heragu, S., “Analysis of Trucking Strategies at a Major Consumer Goods Manufacturer and Distributor,” INFORMS Conference, November 5-9, 2007, Seattle, WA.
  26. Heragu, S., S.S. Heragu, G.W. Evans and X. Yang*, “Analysis of Trucking Strategies at a Major Consumer Goods Manufacturer and Distributor,” SCMIS 2007 Conference, December 9-12, 2007, Melbourne, Australia.
  27. K.M. Gad El Mola, H.R. Parsaei, & H.R. Leep “Improving the Performance of a Manufacturing System:  A Practical Case Study,”  , 37th International Conference on Computers and Industrial Engineering, Alexandria, Egypt, October 20-23, 2007.
  28. K.M. Gad El Mola, H.R. Parsaei, & H.R. Leep “Quantifying the Effects of Operational Performance Measures Using the Analytical Network Process (ANP),”, 37th International Conference on Computers and Industrial Engineering, Alexandria, Egypt, October 20-23, 2007.
  29. Usher, J.S., “If Sigmas are Bad, Why Do We want Six of Them”, ASQ Louisville Section, Louisville, KY Sep 2007.
  30. Usher, J.S., “If Sigmas are Bad, Why Do We want Six of Them”, Regional Business Expo, Louisville, KY Mar 2007.
  31. Usher, J.S., “The State of Engineering”, J.B. Speed School of Engineering - Accolade Program, Sep 2007. 
Document Actions
Personal tools