Windows XP Wireless Quick Setup Guide

  1. Install this Windows  update to support Uofl wireless certificate
  2. Go to the Start menu Click Start > Connect to > Wireless Network Connections.
  3. Then, click on the Change advanced settings listed under the “Related Tasks” menu on the left side of the window. You should see at least two tabs: General and Wireless Networks.
  4. Click the Wireless Networks tab. Check Use Windows to configure my wireless network settings and then click Add.
  5. Type ulsecure under Network name (SSID) and select WPA2 (for WPA2 Enterprise)  for Network Authentication and AES for Data Encryption.
  6. Click the Authentication tab and select PEAP as the EAP type.
  7. Click on the Properties button and verify that the Validate Server Certificate box is checked.
  8. Under Select Authentication Method, verify that Secured Password (EAP-MSCHAP v2) is selected, if not use the drop down menu to select this setting, and then click the Configure button, and make sure that the check box to “Automatically use my Windows logon name and password” is unchecked.
  9. Click OK in the last window and all of the remaining windows.
  10. Click on the message pop up at the lower right corner of your desktop that says Wire-less Network Connection.
  11. The Enter Credentials window will appear, enter your ULINK username and password and leave the "Logon Domain" field empty and click ok.
  12. Another Wireless Network Connection bubble will appear, click on it and a Validate Server Certificate will appear, click on the OK button.
  13. The connection should be established soon after this process is completed however you may have to wait a moment for the validation to occur in your system tray.